TH-TG-800_Tủ môi trường nhiệt độ, độ ẩm 800 lít
Model: TH-TG-800
Code: AAH82032K
Hãng sản xuất: JEIOTECH – Hàn Quốc
Xuất xứ: Hàn Quốc
1. Tính năng kỹ thuật:
Tính năng an toàn:
- Built in door lock.
- Automatic shut off after overheat alarm.
- Low and empty water level alarm.
- Power supply leakage breaker.
- Over current protection.
- Overheat protection.
- Door open alarm.
Tính năng cấu trúc:
- Spacious chamber volume with a maximum capacity of 1500L.
§ Various volume sizes, available to suit any users’need.
- Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
- Water recycling and purifying system reduce water consumption for longer operation.
- Corrosion resistance stainless steel chamber and electric polished humidification tank.
- Air-tight door closure with perfect sealed packing.
§ Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
§ Two-point door latch also enhances tightness to door closure.
- Energy efficiency is achieved by optimization of the insulation system.
§ Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃
- Maintenance of water supply are easily performed with a front water tank.
§ Portable water container makes supplying water convenient.
- Water supply during operation is also available for long term test purposes.
- Direct water system provides user great convenience when performing long-term tests. (optional)
- Clear observation of samples.
§ Tempered glass door with built in wire heater.
§ Energy efficient, long life span LED lighting.
§ Wider view, inner glass door is available for monitoring of samples. (optional)
- Cable port for external probes or wires.
§ 50mm diameter cable port comes standard on the left side of the unit.
§ Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
- Casters for easy mobility during installation or relocation.
Tính năng vận hành:
- Microprocess PID control / Auto-tuning / Calibration.
- User friendly LCD controller.
§ Set value and present value are clearly visible together on display.
§ Operating progression visible in graph mode allow for direct data interpretation.
§ Temperature and other operating parameters recorded with use of an optional recorder. (optional)
- Sufficient programmable control support.
Description
|
TH-TG
|
Programmable Pattern Capacity
|
10
|
Pattern Repeat Time
|
999
|
Max. Segments per a Pattern
|
100
|
Available Max. Segments*
|
100
|
Programmable Process Time per a Segment
|
0 to 99 hr 59 min
|
* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000,
so you need to arrange the number of segment an patterns properly.
2. Thông số kỹ thuật:
Model
|
TH-TG-800
|
TH-TG-1000
|
TH-TG-1500
| ||
Chamber Volume (L / cu ft)
|
770 / 27.2
|
997 / 35.2
|
1540 / 54.4
| ||
Controller
|
PID control (LCD Type)
| ||||
Temperature 1)
|
Range
|
without Humidity (℃ / oF)
|
-5 to 100 / 23 to 212
| ||
with Humidity (℃ /oF)
|
20 to 90 / 68 to 194
| ||||
Fluctuation 1) (±℃ / oF)at 40℃ / 60%RH
|
0.3 / 0.55
| ||||
Variation 1) (±℃ / oF)at 40℃ / 60%RH
|
0.5 / 0.9
| ||||
Humidity
|
Range (%RH)
|
FULL RANGE : 20 to 95
40 to 95 at 20℃ (59oF) 30 to 95 at 30℃ (86oF) 20 to 95 at 50℃ to 85 (122oF to 185oF) | |||
Fluctuation 2) (±%RH) at 60%RH / 40℃
|
2
| ||||
Variation 2) (±%RH) at 60%RH / 40℃
|
3
| ||||
Time
|
Heating 4)
|
55min (-5℃ → 100℃)
| |||
Cooling 4)
|
145min (100℃ → -5℃)
| ||||
Refrigeration
|
System
|
Air - cooled
| |||
Refrigerant
|
R- 507A
| ||||
Capacity (W)
|
375
|
375
|
750
| ||
Cooler
|
AL plate fin cooler
| ||||
Heater
|
Material
|
SUS Tube Heater
| |||
Drying Bulb (W)
|
1000 x 2
|
1500 x 2
| |||
Humidity Bulb (W)
|
600 x 2
|
600 x 3
| |||
Sensor
|
Temperature
|
Pt 100
| |||
Humidity
|
Electronic sensor (Free of drying a wet pack and good response time)
| ||||
Air Flow
|
2 set of sirocco fan
| ||||
Material
|
Internal
|
SUS #304 (2B polish)
| |||
External
|
Stainless steel #304, Steel with powder coating
| ||||
Insulation
|
Polyurethane (70mm / 2.76")
| ||||
Door
|
Glasswool
| ||||
Water Tank
|
Capacity (L / cu ft)
|
15 / 0.53
|
30 / 1.1
| ||
Water Quality
|
pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below
| ||||
Interface Port
|
Basically RS-232C, [RS-485 : optional]
| ||||
Cable Port
|
Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2")
| ||||
Viewing Window (mm / inch)
|
230×340 / 9.1×13.4 (option)
| ||||
Quantity of Wire Shelves (included / max.)
|
2 / 17
| ||||
Distance of between Shelves (mm / inch)
|
60 /2.4
| ||||
Dimension
(W×D×H) |
Viewing Window (mm / inch)
|
200×330 / 7.9×13
| |||
Internal (mm / inch)
|
748×920×1120 / 29.4×36.2×44.1
|
748×1190×1120 / 29.4×46.9×44.1
|
1100×1000×1400 / 43.3×39.4×55.1
| ||
External (mm / inch)
|
1200×1230×1973 / 47.2×48.4×77.7
|
1200×1500 ×1973 / 47.2×59.1×77.7
|
1554×1876×1935 / 61.2×73.9×76.2
| ||
Net Weight (kg / lbs)
|
360±10 / 794±22
|
410±10 / 904±22
|
480±10 / 1058±22
| ||
Electrical Requirements
|
AC230V, 1ph, 50Hz
|
18.5 A
|
18.5 A
|
30.0A
| |
Cat.No.
|
AAHC2032K
|
AAHC2042K
|
AAHC2052K
| ||
1) All specifications are under ambient temperature 20℃ (68oF), No load.
2) Technical data according to DIN 12880, IEC 60068
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.※ CE Certification
2) Technical data according to DIN 12880, IEC 60068
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.※ CE Certification
3. Cung cấp bao gồm:
- Tủ môi trường nhiệt độ, độ ẩm 800 lít; Model: TH-TG-800; Code: AAH82032K
- Phụ kiện tiêu chuẩn
- Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt
Không có nhận xét nào:
Đăng nhận xét