TH-I-300_Tủ môi trường nhiệt độ, độ ẩm 300 lít
Model: TH-I-300
Code: AAH80122K
Hãng sản xuất: JEIOTECH – Hàn Quốc
Xuất xứ: Hàn Quốc
1. Tính năng kỹ thuật:
Tính năng an toàn:
- Automatic shut off after overheat alarm.
- Low and empty water level alarm.
- Power supply leakage breaker.
- Over current protection.
- Overheat protection.
- Door open alarm.
Tính năng cấu trúc:
- Three different volume sizes are available to suit any users’ needs.
- Advanced performance of low temperature and humidity control is achieved by adapting the humidification tank interior to the chamber.
- Corrosion resistance stainless steel chamber and electric polished humidification tank.
- Air-tight door closure with perfect sealed packing.
§ Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
- Maintenance of water supply are easily performed with a front water tank.
§ Water level check indicated by water level bar in the tank.
§ Portable water container makes supplying water convenient.
- Water supply during operation is also available for long term test purposes.
- Direct water system provides user great convenience when performing long-term tests. (optional)
- Clear observation of samples.
§ Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
§ Wider view, inner glass door is available for monitoring of samples. (optional)
- Exhaust duct is located at the upper right side of the unit to avoid influence other devices.
- Detachable condenser air-filter for easy maintenance of refrigerating efficiency.
§ Maintenance of air filter no longer cumbersome with our detachable condenser air filter.
§ Cable port for external probes or wires.
§ 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
- Casters for easy mobility during installation or relocation.
2. Thông số kỹ thuật:
Model
|
TH-I-180
|
TH-I-300
|
TH-I-408
| |
Chamber Volume (L / cu ft)
|
180 / 6.4
|
300 / 10.6
|
408 / 14.4
| |
Control System
|
BDBC2 system - Balanced Dehumidifying & Bath Cooling control
| |||
Controller
|
Programmable, Touch screen type controller (5.7" Color monitor)
| |||
Temperature
|
Range (℃ / oF)
|
-35 to 150 / -31 to 302 without humidity* best programmable control range : -30 to 140 / -22 to 284
| ||
Fluctuation1)
(±℃ / oF) at 55℃ / 60%RH |
0.1 / 0.18
|
0.2 / 0.36
|
0.2 / 0.36
| |
Variation1)
(±℃ / oF) at 55℃ / 60% |
0.6 / 1.08
|
0.5 / 0.9
|
0.5 / 0.9
| |
Time
|
Heating
- without Humidity (Min.) |
50 From -35℃ to 120℃ (-31oF to 248oF)
| ||
Cooling
- without Humidity (Min.) |
60 From 20℃ to -35℃ (68oF to -31oF) on singe point control *
| |||
Humidity
|
Range (%RH)
|
Full Range: 20 to 98
| ||
40 to 70 at 10℃ (50oF)
20 to 90 at 20℃ (68oF) 20 to 98 at 25 to 80℃ (77oF to 176oF) 20 to 80 at 90℃ (194oF) | ||||
Fluctuation 1)
(±%RH) at 60%RH / 55℃ |
0.3
|
0.4
|
0.3
| |
Variation 1)
(±%RH) at 60%RH / 55℃ |
3
|
3
|
3
| |
Refrigeration
|
System
|
Mechanical single stage refrigerator system(air-cooled condenser)
| ||
Refrigerant
|
R-404A
| |||
Cooler
|
Plate fin cooler
| |||
Heater
|
Material
|
Ni-Cr Wire Heater / SUS sheath Heater
| ||
Sensor
|
Temperature
|
Pt 100
| ||
Humidity
|
Electronic sensor - Free of drying a wet pack and good reaction time
| |||
Material
|
Interior
|
Stainless steel #304
| ||
Exterior
|
Stainless steel #304, Steel with powder coating
| |||
Insulation
|
Polyurethane foam 100mm (3.94")
| |||
Door
|
Glass wool
| |||
Air Flow
|
Tangent blower (90W)
| |||
Water Supply
|
Capacity
|
15L (0.53cu ft) - Cartridge type
| ||
Water Quality
|
pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below
| |||
Quantity of Wire Shelves (included / max.)
|
2 / 9
|
2 / 10
|
2 / 10
| |
Distance of between Shelves (mm / inch)
|
60 /2.4
| |||
Dimension
(W×D×H) |
Interior
(mm / inch) |
500×630×600 / 19.7×24.8×23.6
|
600×630×800 / 23.6×24.8×31.5
|
600×850×800 / 23.6×33.5×31.5
|
Exterior (mm / inch)
|
1025×1035×1530 / 40.4×40.7×60.2
|
1120×1070×1730 / 44.1×42.1×68.1
|
1120×1240×1730 / 44.1×44.8×68.1
| |
Viewing Windows (mm / inch)
|
200×330 / 7.9×13
| |||
Net Weight (kg / lbs)
|
310±10 / 683.4±22
|
375±10 / 826.7±22
|
400±10 / 881.8±22
| |
Cable Port
|
Basically one hole provided / Ø50mm (2")Optionally max. two holes available / Ø50 or 80mm (2 or 3.2")
| |||
Interface Port
|
Basically RS-232C [RS-485(Maximum 9 Units Control)-optional]
| |||
Electrical Requirements (230V, 50Hz)
|
1ph / 23A
| |||
Cat. No.
|
AAH80112K
|
AAH80122K
|
AAH80132K
| |
1) Technical data according to DIN 12880, IEC 60068.※ Permissible environmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).※ All specifications are under ambient Temperature 20℃ (68oF), No Load.
3. Cung cấp bao gồm:
- Tủ môi trường nhiệt độ, độ ẩm 300 lít; Model: TH-I-300; Code: AAH80122K
- Phụ kiện tiêu chuẩn
- Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt

Không có nhận xét nào:
Đăng nhận xét